The SawStop® Contractor Saw offers versatility and safety.
30-INCH STANDARD FENCE ASSEMBLY: This aluminum fence assembly is engineered for the ideal balance between lightweight utility and accurate lockdown.
CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw.
UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price.
SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
FEATURES
- 30" Aluminum Fence system provides smooth operation and precision measurements.
- SawStop Safety System stops on contact with skin.
- Includes Two Steel Extension Wings
- The most configurable saw in the SawStop lineup
- Dimension: 58 1/2" w, 40" d, 34 3/4 h
- Precision, performance and safety all come together to make this the right choice for experts looking for a reliable saw at an affordable price.
INCLUDED ITEMS
- (2) Steel Extension Wings
- (1) Miter Gauge
- (1) Micro Blade Guard
- (1) Riving Knife
- (2) Blade Wrenches
- (1) Push Stick
- (1) 10” Blade
- (1) Standard Lockdown Insert
- (1) Standard Brake Cartridge
- (1) Owner’s Manual
- (1) Assembly Instructions
- (2) Hardware Packs
- (1) 3mm Hex Key
- (1) 5mm Hex Key
- (1) 8mm hex Key
- (1) Blade Spacing Adjustment Gauge
SPECIFICATIONS
-
30" Rip Capacity:CNS175-SFA30: 30" Aluminum Extrusion Fence
-
Motor Option(s) (60Hz TEFC):1.75 HP available
-
Overall saw dimensions 30 in:58 1/2" W x 40" D x 34 3/4" H
-
Motor Configuration(s):CNS175: 1.75 HP, 120v, 14 A (user config. to 220v w/optional kit available for purchase).
-
Saw body footprint:25 3/4" W x 27" D (w/stand installed)
-
Cast iron table:20″ W x 27″ D
-
Cast iron table (w/ extension wings):44″ W x 27″ D
-
Extension wings:12″ W x 27″ D Stamped Steel (optional cast iron for purchase)
-
Extension table 30 in:N/A
-
Shipping weights - w/ 30 in fence systems:268 lbs (2 boxes)
-
Shipping dimensions (saw body only):35" W x 30" D x 20" H
-
Shipping weight (approx.):240 lbs (table saw only)
-
Assembled weights - w/ 30 in fence systems:245 lbs
-
Weights - table saw only:225 lbs
-
Weights - (optional cast iron wings):35 lbs each
-
Blade:40-tooth, prof. grade, 5/8″ arbor
-
Blade diameter:10"
-
Blade tilt:Left
-
Blade kerf:0.118″ (3mm)
-
Blade plate thickness:0.078″ (2mm)
-
Max. depth of cut, blade at 0º:3 1/8″
-
Max. depth of cut, blade at 45º:2 1/4″
-
Max. rip, left of blade (w/30” Std. Fence):16 1/2"
-
Max. rip, right of blade (w/30” Std. Fence):30 1/2" (w/Contractor Fence Assembly)
-
Dado diameter:8" (requires dado brake cartridge & insert)
-
Dado max. width:29/32”
-
Arbor diameter at blade:5/8"
-
Main bearing size:62mm OD x 30mm ID
-
Second bearing size:52mm OD x 25mm ID
-
Table in front of blade (max. elevation):10 5/8"
-
Table behind blade (max. elevation):7 1/8
-
Arbor Runout:0.001″ Maximum allowable runout
-
Table flatness measured diagonally:0.016″ Maximum gap
-
Blade alignment with miter slot:0.010″ Maximum displacement
-
Deviation of miter gauge indexing stops from actual:±0.25º
-
Alignment between splitter and blade:0.010″ Maximum difference
-
Miter slots T-shaped:3/4″ at top, 1″ at bottom, 3/8″ deep
-
Miter slots center:11 1/8″ center-to-center
-
Miter slots info:5 1/2″ (arbor flange to center of right slot)
-
Dust collection port diameter:4"
-
Riving knife / splitter thickness:0.090" (2.3 mm)
-
Blade guard:Standard polycarbonate, extends 1″ right of blade (opt dust guard for purchase)
-
Insert:zero clearance, phenolic core, melamine surfaces
-
Hand wheels:6″ diameter, cast alum. w/ ABS handle
-
Belts:V-ribbed belt – static dissipative
